Tag Archives | roklin

Transverse Cracks in Asphalt

A crack forming at an approximate right angle to the center line is a transverse crack. They are often regularly spaced. They are caused by movement due to temperature changes and aging, hardening asphalt. Transverse cracks will initially be widely spaced (over 50’). Additional cracking will occur as they age until they are closely spaced [...]

Read full story Comments { 0 }

Se Habla Español, and Not Just for Cinco De Mayo

   We are celebrating Cinco De Mayo by offering free shipping from 5-5-12 to 5-10-12. Visit www.roklinsystems.com to place your order. Starting in June, our marketing materials will be available in Spanish. We will also feature google translate on the site so visitors can chose to view the site in Spanish. We have bilingual customer [...]

Read full story Comments { 0 }

Defining the Benefits of Roklin’s Repair Products

smooth /smuð/  adverb, verb, noun, adjective 1. free from projections or unevenness of surface; not rough: smooth wood; a smooth road. SMOOTH, as in the ride provided by FloMix (asphalt) or FlexSet (concrete) repairs.   en·dur·ing /ɛnˈdʊərɪŋ, -ˈdyʊər-/ adjective 1. lasting; permanent: a poet of enduring greatness. ENDURING describes how FloMix and FlexSet repairs are long-lasting.   [...]

Read full story Comments { 0 }

Pavement Damage 15,Pavement Settling or Heaves

Unstable or poorly-drained subgrade soils may cause pavements to settle after construction. Poorly-compacted utility trenches may also settle. This may be a gentle swale or a fairly severe dip. Frost-susceptible soils and high water tables can cause pavements to heave during the winter months. Water will freeze, expand and cause cracks. Extensive pavement cracking and [...]

Read full story Comments { 0 }

Break From Concrete Damage

I was thinking about how many blogs we have about conrete damage types and how many there are still. When I’m done with the Paser Ratings Concrete Damage descriptions, I plan to write about asphalt damage. Although there are fewer types of asphalt damage, it still felt like time for a break. So, for a [...]

Read full story Comments { 0 }

Pavement Damage 14, Faulting in Concrete

Joints and cracks may fault or develop a step between adjacent slabs. Faulting is caused by pumping of subgrade soils and creation of voids. Heavy truck or bus traffic can rapidly accelerate faulting. Longitudinal joints may fault due to settlement of an adjacent slab. Faulting creates a poor ride and may cause slab deterioration. Minor [...]

Read full story Comments { 0 }

Pavement Damage 13, Blowups

Concrete slabs may push up or be crushed at a transverse joint. This is caused by expansion of the concrete that has caused breakdown and incompressible materials (sand, etc.) have infiltrated into poorly sealed joints. As a result, there is no space to accommodate expansion. It is more common in older pavements with long joint spacing. [...]

Read full story Comments { 0 }

Pavement Damage 11

Concrete Damage Series, Part 11 Corner cracks Diagonal cracks near the corner of a concrete slab may develop, forming a triangle with a longitudinal and transverse joint. Usually these cracks are within one foot of the corner of the slab. They are caused by insufficient soil support or concentrated stress due to temperature-related slab movement. [...]

Read full story Comments { 0 }

Types of Pavement Damage 10

Concrete Damage Series, part 10 D-cracks Occasionally, severe deterioration may develop from poor quality aggregate.D-cracking develops when the aggregate is able to absorb moisture. This causes the aggregate to break apart under freeze-thaw cycles which leads to deterioration. Usually, it starts at the bottom of the slab and moves upward. Fine cracking and a dark [...]

Read full story Comments { 0 }

Types of Pavement Damage, 9

Concrete Damage Series, Part 9 Transverse Cracking Transverse cracks may appear parallel to joints and can be caused by thermal stresses, poor subgrade support, or heavy loads. Transverse cracking is sometimes related to slabs having joints spaced too widely. Joints spaced more than 15’ apart commonly develop mid-slab transverse cracks. As with joints, these cracks [...]

Read full story Comments { 1 }